Over the course of its 20-plus years of production, the trusty GM LS engine came from the factory in a wide range of displacements, from a humble 4.8L to a rowdy 7.0L. So if you’re thinking about an LS engine swap, LS engine build, or LS engine upgrade, the first number you’ll likely care about is the LS motor’s displacement in liters.
This handy LS resource page is a good one to bookmark if you’re considering an LS crate engine for a swap, or looking for a 6.2L (about 378 cubic inches) LS short block to start a project.
Learn more about each LS engine displacement:
* 4.8L LS Engine Guide: Block Specs, Swap Resources & Build Info
* 5.3L LS Engine Guide: Block Specs, Swap Resources & Build Info
* 5.7L LS Engine Guide: Block Specs, Swap Resources & Build Info
* 6.0L LS Engine Guide: Block Specs, Swap Resources & Build Info
* 6.2L LS Engine Guide: Block Specs, Swap Resources & Build Info
* 7.0L LS Engine Guide: Block Specs, Swap Resources & Build Info
The 6.2L LS Engine Family
After being introduced as the L92/Vortec 6200 engine in GM’s large SUVs, the 6.2L’s ascension up the horsepower ladder got really interesting when the LS3 arrived on the scene as the base powerplant for the Corvette in 2008. Horsepower climbed even higher when GM decided to supercharge it to create the LSA for the new ZL1 Camaro, then again to create the LS9 for the new Corvette ZR1.
All told, if you need a good foundation for a mega-horsepower build, then the aluminum block 6.2L can probably handle it.
You may also want to check out our Definitive Guide to LS Engine Specs and LS Engine Upgrades.
6.2L LS Engine Specs
Suffice it to say, with such a wide range of 6.2L LS engines out there, it’s critical to know the distinction between each one before you choose an engine for your swap or build. We’ve listed them all in the table below, and we added hyperlinks on each specific LS engine name (L92, LS3, LSA, etc.) that you can click on to learn more.
6.2L LS & Vortec Engine Spec Guide
| Years | Liter | Code | Vehicle | Cam Bolts | Reluctor | VVT | AFM | Flex Fuel | VIN (8th Digit) | Block | Head |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2007-08 | 6.2 | L92 | SUV | 1 | 58X/4X | Yes | No | No | 8 | Alum. | Rectangle |
| 2010-14 | 6.2 | L94 | SUV | 1 | 58X/4X | Yes | Yes | Yes | F | Alum. | Rectangle |
| 2010-15 | 6.2 | L99 | Camaro (auto) | 1 | 58X/4X | Yes | Yes | No | J | Alum. | Rectangle |
| 2009-14 | 6.2 | L9H | Truck/SUV | 1 | 58X/4X | Yes | No | Yes | 2 | Alum. | Rectangle |
| 2008-17 | 6.2 | LS3 | Performance Cars | 1 | 58X/4X | No | No | No | W | Alum. | Rectangle |
| 2010-13 | 6.2 | LS3 | C6 Grand Sport | 3 | 58X/4X | No | No | No | W | Alum. | Rectangle |
| 2008-15 | 6.2 | LSA | CTS-V, 5th Gen. ZL-1 | 1 | 58X/4X | No | No | No | P | Alum. | Rectangle |
| 2009-13 | 6.2 | LS9 | Corvette ZR-1 | 3 | 58X/4X | No | No | No | T | Alum. | Rectangle |
Looking for a 6.2L LS Engine?
Here are two LS Engine Spotter’s Guides that will help:
- LS Engine Spotter’s Guide, Part 1: Matching the Vehicle to the Engine
- LS Engine Spotter’s Guide, Part 2: Matching the Engine to the Vehicle
LS Engine Swap Parts Guide
Our friends over at Summit Racing developed a helpful resource that’ll give you an idea of some of the parts you’ll need to complete your LS engine swap—including specific LS swap requirements for exact vehicle models. You can check it out here:
I am thinking of swapping the original (high mileage) LS2 in my 2007 Vette (Mar 2007 build) for an LS3 (GM crate engine approximately 480-500hp), 6spd manual Z51 coupe. Just wondering what unforeseen probs I might encounter…ECM programming, clutch, etc. Have also replaced the rad with a Dewitt ‘Direct Replacement’ which also hooked to the stock oil & trans cooler and has much better cooling.
I have a question I am putting a 5.3 with active fuel management into my 2009 Denali that had a 6.2 with no active fuel management can I just believe the engine the way it is and install it and will everything work
Can anyone please discuss this issue with me I would appreciate any help I can get
Hey Kenneth, have you tried contacting the Summit Racing tech folks? They’ll be able to help answer that question.
Brother you do not want anything to do with AFM. It becomes a huge problem for the lifters as the engine gets a little age on it. Im swapping out my 5.3 AFM for a 6.2 If you’ve already went to the AFM system I recommend getting one of the AFM disabler chips. Including myself I know 5 different people in my area that’s lifters keep collapsing because of the AFM. It was a noble but bad design from Chevrolet.
Why would you pull a 6.2 and replace it with a 5.3. You are probably the only person in the country even considering this.
Closer to answering your question, at least you would have to change computers. You may even have to change your wiring harness. I don’t know the specifics on that.
I can tell you I pulled a 5.3 out of a Tahoe and put it in the same year Tahoe that had a 5.3 and it would not fire until we changed computers. Once we did that it hit first lick.
Yes and no you’ll have to change the tune in the computer because I’m sure the 6.2 had vvt
L92 is in the table twice and L94 is missing. Would be good to correct that.
Hey Jeff, good catch! We’ve made the fix in the table above, thanks for reading.
Kinda a dumb question but I’m swapping a 6.2 out of a 2007 Yukon Denali and I’m having a little trouble finding a flywheel for it because I plan on using the sm465 that’s already in my truck and that’s a 1 and 1/8 x 10 input shaft so I need the flywheel, clutch plate and pressure plate.
I have a 2000 GMC Sahara 5.3LS. I’m wanting to put A6.2LS out of a Cadillac Escalade. Will I have any problems thanks