Parts Bin: Safely Remove Stubborn Wheels with Milwaukee Tool SHOCKWAVE Lug Nut Sockets
Work on enough cars and trucks and you’ll inevitably get to one fitted with fancy custom wheels with narrow lug nut bores. That presents a big dilemma: How do you […]
https://www.onallcylinders.com/2023/05/13/parts-bin-safely-remove-stubborn-wheels-with-milwaukee-tool-shockwave-lug-nut-sockets/#respond
Pry Bars: Useful Tools That Get No Respect
No one ponders a pry bar (crow bar, pinch bar, etc.), at least blissfully. It’s a tool that gets zero recognition and little respect, yet it is actually incredibly useful. So […]
https://www.onallcylinders.com/2023/04/26/pry-bars-useful-tools-that-get-no-respect/#respond
Video: 4 Important Plasma Cutting Tips & Techniques for Metal Fabricators
For many serious fabrication and metalworking shops, a plasma cutter is a must-have tool. That’s because a quality plasma cutter not only saves you a ton of time, it delivers […]
https://www.onallcylinders.com/2023/04/06/video-4-important-plasma-cutting-tips-techniques-for-metal-fabricators/#respond
Buyers Guide: How To Pick the Best Shop Crane (AKA Cherry Picker) for Your Garage
There aren’t a lot of cost-effective methods to move heavy things in your shop (or install an engine for that matter). Sure, a gantry crane of some sort will work […]
https://www.onallcylinders.com/2023/03/29/buyers-guide-how-to-pick-the-best-shop-crane-aka-cherry-picker-for-your-garage/#respond
Tap & Die 101: How to Use a Tap & Die Set to Cut Internal & External Threads
If you have any sort of shop experience, you’ll know that pulling out the tap and die set usually means something went wrong. Probably the only thing worse is when […]
https://www.onallcylinders.com/2023/02/03/tap-die-101-how-to-use-a-tap-die-set-to-cut-internal-external-threads/#comments
Video: Tips for Cutting Steel & Metal Tubing with a Miter Saw
Do much fabrication or custom chassis and suspension work, and there’s a good chance you’ll eventually have to cut some boxed or round metal tubing. But while you’d think cutting […]
https://www.onallcylinders.com/2023/01/31/video-tips-for-cutting-steel-metal-tubing-with-a-miter-saw/#respond
10 Cheap & Easy Tool Hacks That Solve Common Problems in the Garage
Garage hacks? I’ll bet everyone reading this has their own examples—things that fix targeted issues without spending a large amount of cash on specialized tools or apparatuses. Those fixes might […]
https://www.onallcylinders.com/2023/01/06/10-cheap-easy-tool-hacks-that-solve-common-problems-in-the-garage/#respond
Tools Under $30 Gift Guide: Precision Screwdrivers
Whether it’s for a holiday or birthday, this Tools Under 30 Dollars Gift Guide Series shows you important, yet somewhat uncommon, tools that any gearhead would want. Today, let’s talk about Precision […]
https://www.onallcylinders.com/2022/12/18/tools-under-30-gift-guide-precision-screwdrivers/#respond
Tools Under $30 Gift Guide: Finger/Thumbwheel Ratchets
Whether it’s for a holiday or birthday, this Tools Under 30 Dollars Gift Guide Series shows you important, yet somewhat uncommon, tools that any gearhead would want. Today, let’s talk about Finger Ratchets. […]
https://www.onallcylinders.com/2022/12/11/tools-under-30-gift-guide-finger-thumbwheel-ratchets/#respond
Wire Crimpers 101: What is a Wire Crimp Tool? (And What to Consider Before Buying One)
This article was originally part of our Tools Under 30 Dollars Gift Guide Series because a lot of gearheads don’t have a dedicated set of wire crimpers, often relying on other tools […]
https://www.onallcylinders.com/2022/12/07/wire-crimpers-101-what-is-a-wire-crimp-tool-and-what-to-consider-before-buying-one/#respond
