Ask Away! with Jeff Smith: Is a GM 200-4R Automatic a Good Choice for a Mostly Stock 1968 Camaro? What Transmission Would You Recommend?
I have a really nice 1967 Camaro that my sister bought from the first owner way back in 1979. It’s a California car with a matching-numbers SS350 engine with a […]
https://www.onallcylinders.com/2023/01/30/ask-away-with-jeff-smith-is-a-gm-200-4r-automatic-transmission-a-good-choice-for-cruising-in-a-mostly-stock-1968-camaro/#comments
Ask Away! with Jeff Smith: Should I Check My Automatic Transmission Fluid Level with the Engine Running?
I’m new to the car scene and one thing I have always been told is to check the automatic transmission fluid with the engine running, but to check the engine […]
https://www.onallcylinders.com/2023/01/25/ask-away-with-jeff-smith-should-i-check-my-automatic-transmission-fluid-level-with-the-engine-running/#comments
Video: How to Properly Adjust a B&M Automatic Shifter Cable
A lot of you are running a B&M automatic transmission shifter in your muscle car, hot rod, or classic truck, which means you probably already know how important proper shifter […]
https://www.onallcylinders.com/2022/10/18/video-how-to-properly-adjust-a-bm-automatic-shifter-cable/#comments
The Malleable Connection: Flexplates & Flexplate Installation Tips
Unless your automatic transmission car has a vintage Clutch-Flite or Clutch-Turbo, there’s a pretty good chance it will be equipped with a flexplate. The reason for a flexplate is to […]
https://www.onallcylinders.com/2022/10/07/the-malleable-connection-flexplates-flexplate-installation-tips/#respond
Video: How to Bleed a Hydraulic Throwout Bearing
A little while ago, we showed you a video from Mantic Clutch USA that explained what a hydraulic throwout bearing is. Well, the gang from Mantic Clutch is back, and […]
https://www.onallcylinders.com/2022/09/07/video-how-to-bleed-a-hydraulic-throwout-bearing/#respond
Easy Power Plays for 4.6L 3V Mustangs (Part 2): Ford Racing Aluminum Driveshaft Install & Some Driveshaft Math
This one isn’t a sexy swap. In fact, you might say it’s pretty mundane when looking through the list of mods for Mustangs. However, it’s also routinely rated as one […]
https://www.onallcylinders.com/2022/08/19/easy-power-plays-for-4-6-3v-mustangs-part-2-ford-racing-aluminum-driveshaft-install-some-driveshaft-math/#comments
Video: What is a Hydraulic Throwout Bearing & How Does it Work?
If you’re doing any work in or around your clutch (or replacing it altogether), there’s a good chance you’ll come across a component called a throwout bearing, or more specifically […]
https://www.onallcylinders.com/2022/08/16/video-what-is-a-hydraulic-throwout-bearing-how-does-it-work/#respond
Ask Away! with Jeff Smith: Fixes for a Poor-Shifting GM 700-R4 Automatic Transmission on a Carbureted 383 SBC
I’ve got a 700-R4 in my Chevy C10 pickup behind a typical 383ci small-block Chevy. The engine runs fine with a set of Edelbrock heads and Performer RPM intake and […]
https://www.onallcylinders.com/2022/06/06/ask-away-with-jeff-smith-fixes-for-a-poor-shifting-gm-700-r4-automatic-transmission-on-a-carbureted-383-sbc/#comments
Should Centrifugal Clutch Pressure Play a Big Role When Selecting a Clutch for Your Street Car?
RAM Clutches recently posted an article on centrifugal clutch pressure on its blog, and the info was so good that we wanted to share a bit of it here. You […]
https://www.onallcylinders.com/2022/06/02/should-centrifugal-clutch-pressure-play-a-big-role-when-selecting-a-clutch-for-your-street-car/#comments
Video: How to Flip the Shifter Position on a Tremec TKO & Magnum Transmission
It’s tough to argue that the Tremec TKO and Magnum five- and six-speeds are really popular manual transmission retrofits for a wide range of classic muscle cars. But beyond their […]
https://www.onallcylinders.com/2022/05/31/video-how-to-flip-the-shifter-position-on-a-tremec-tko-magnum-transmission/#respond
